ASSAB Mirrax ESR

牌號ASSAB Mirrax ESR
廠家ASSAB Pacific Pte. Ltd.
分類Steel
介紹General
Demands placed on plastic mould tooling are increasing. Such conditions require mould steel that possess a unique combination of toughness, corrosion resistance and the ability to reach uniform hardness levels throughout large cross sections. Mirrax ESR has proven to be the right choice for these applications. Mirrax ESR is a premium grade stainless tool steel with the following properties:
  • excellent polishability
  • high corrosion resistance
  • excellent through-hardening properties
  • good ductility and toughness
  • good wear resistance

The combination of these properties provides a steel with outstanding production performance. The practical benefits of good corrosion resistance in a plastic mould can be summarized as follows:
  • Lower mould maintenance costs: The surface of cavity impressions retain their original finish over an extended service life. Moulds stored or operated in humid conditions require no special protection.
  • Lower production costs: Since cooling channels are less likely to be affected by corrosion (unlike conventional mould steel), heat transfer characteristics, and therefore cooling efficiency, are constant throughout the mould life, ensuring consistent cycle times.
These benefits, coupled with the high wear resistance of Mirrax ESR, offer the moulder low-maintenance, long-life moulds for the greatest overall tooling economy.

Note: Mirrax ESR is produced using the Electro-Slag-Remelting (ESR) technique. The result is a mould steel with a very low inclusion level providing excellent polishability characteristics.

Applications
Although Mirrax ESR is recommended for all types of moulds, its special properties make it particularly suitable for moulds with the following demands:
  • Corrosion/staining resistance, i.e. for moulding of corrosive materials, e.g. PVC, acetates, and for moulds subjected to humid working/storage conditions.
  • High surface finish, i.e. for the production of optical parts, such as camera and sunglass lenses, and for medical components, e.g. syringes, analysis vials etc..
  • Toughness/ductility, i.e. for complex moulds
  • Outstanding through-hardening characteristics i.e. high-hardenability, important for larger moulds.
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
ASSAB Pacific Pte. Ltd. 產品展示 種類
ASSAB Mirrax 40 Steel
ASSAB Stavax ESR Steel
ASSAB Dievar Steel
ASSAB XW-5 Steel
ASSAB 709M Steel
ASSAB Nimax Steel
ASSAB XW-42 Steel
ASSAB 718 HH Steel
ASSAB Vanadis 4 Steel
ASSAB Elmax Steel

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,FDA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved