ASSAB Mirrax 40

牌號ASSAB Mirrax 40
廠家ASSAB Pacific Pte. Ltd.
分類Steel
介紹General
Mirrax 40 is a remelted stainless tool steel supplied prehardened to 40 HRC.

Mirrax 40 is produced using the electroslag remelting (ESR) process—an additional step in the steelmaking process that ensures very clean steel with low sulphur content (0.003% max.) and non-metallic inclusions. Consequently, Uddeholm Mirrax 40 is capable of being polished to a very high surface finish.

Mirrax 40 is characterized by:
  • excellent machinability
  • excellent polishability
  • excellent ductility and toughness
  • uniform hardness even in large dimensions
  • good indentation resistance
  • good corrosion resistance
These properties combine to give a steel with outstanding production performance.

The practical benefits of good corrosion resistance can be summarized as follows.
  • Lower mould maintenance cost: The surface of cavity impressions retain their original finish over an extended service life. Moulds stored or operated in humid conditions require no special protection.
  • Lower production costs: Since cooling channels are less likely to be affected by corrosion (unlike conventional mould steel), heat transfer characteristics and therefore cooling efficiency are constant throughout the mould life, ensuring consistent cycle times.

The benefit of the prehardened condition can be summarized as follows.
  • No hardening risks
  • No hardening costs
  • Time saving, e.g. no waiting for heat treatment
  • Lower tool cost (e.g. no distortion to rectify)
  • Modifications easily carried out

Applications
  • Injection moulds for both corrosive and non-corrosive plastics
  • Plastic moulding of high surface-finish products (e.g., Bezels and casings for TV and computers)
  • Blow moulding of corrosive plastics or high surface-finish transparent products (e.g. PET bottles)
  • Extrusion dies
  • Constructional parts
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
ASSAB Pacific Pte. Ltd. 產品展示 種類
ASSAB ASP 60 Steel
ASSAB Polmax Steel
ASSAB Nimax Steel
ASSAB Stavax ESR Steel
ASSAB 618T Steel
ASSAB Corrax Steel
ASSAB Caldie Steel
ASSAB RoyAlloy Steel
ASSAB XW-42 Steel
ASSAB Vancron 40 Steel

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,F(xiàn)DA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved